How to replace RackEye Sensor batteries

This article shows you how to replace the batteries for the RackEye Sensor

2 x Energizer Lithium AA batteries are recommended 

Replacing RackEye sensor batteries

1. Use the Mobile App to de-activate the RackEye.
   (This is to avoid unnecessary event (Alert/Warning) being generated)
2. Remove the RackEye from the racking leg
3. Turn to the back of the sensor and unclip the  battery cover
4. Remove the batteries from the sensor
5. Insert new batteries taking care to put them in the correct orientation. Always use New Batteries. (A-Safe recommend using Energizer ultimate lithium batteries to achieve optimal battery life for this product.  Using alkaline batteries may result in unusual behaviour.)
6. The RackEye sensor will now flash a boot up sequence
7. Replace the battery cover and put the RackEye back on the racking leg.
8. Use the Mobile app to reactivate the RackEye.